My blog and 3D prints
My blog and 3D prints
Wooooot! Calibration time come on! Now that my Virtual server woes have been dealt with, we're printing again! This time we're going to tune our startup sequence. Reduce our prep time and minimize our time to print! But before we dive into that, we
We're back!! This time we're fuuuuuuming! WHEN IT COMES TO OPEN SOURCE SOFTWARE THERE ARE PRINCIP.... *deep sigh*. OK, before I go into full blown rant mode, lets take a step back. Unlike the last post, this won't about 3D printing or upgrades, just
Here we are! The end of the trilogy! Our final chapter of printer upgrades (for now of course :P) Last time, it was all about bed leveling and getting our z-axis to be perfectly level. We're done with adding real upgrades, so its time to get back to
Hey all! Coming back at ya with part 2! Last time we upgraded Octoprint to python 3 and made our printer run a lot quieter. This time around, its all about precision. Not just your naked eye, close enough, horse shoe hand grenade precision. I'm talk
Yes! Another Upgrade! But this isn't your typical 3D printed upgrades like in the past. Nor is it your average technological shenanigans to automate things. No no, this is the real deal. Actual store bought, authentic, locally sourced, not your fath
WHAT?! An actual post about 3D Printing?! That's right! I've done enough putzing around on other side projects that its time to get back to what this blog is really all about. Recently, I've taken some time off and it gave me the opportunity to upgr
Yep! Time to start cleaning up this mess! Some of them fixing mistakes and some straight up cosmetic to quell my OCD! So lets just dive in! Mind the Glass Yeah, so starting with our mistake. Turns out there are many good reasons to not lea
by 
